|
Applications - Laser Engraved Rubber Rolls & Plates CARE OF LUMINITE RUBBER COVERED, LASER ENGRAVED SLEEVE(S)/CYLINDER(S) The material used in making your rubber covered, laser engraved sleeve(s)/cylinder(s) has been chosen for your type of ink, substrate and operating conditions. Proper care instructions follow: CYLINDER WASH UP: Clean as soon as the sleeve(s)/cylinder(s) are removed from the press, before the ink dries and hardens. Using a soft bristled brush and your ink solvent, or an approved nonvolatile wash up solution for solvent-based inks, is recommended. For water-based inks, use a mild soap and water. Isopropyl or industrial alcohol is suitable for most rubber types. Rinse with water and dry with an air hose (Use no more than 80 psi) if available. Please contact your sales representative if you have questions regarding a particular solution. STORAGE: After cleaning and drying, wait at least four (4) hours (This is to ensure that all solvents or liquids have had a chance to evaporate before being sealed in, which could result in damage to the rubber) before putting protective wrap around the print surface. (Ozone protective wrap is recommended - Nitrile, Neoprene and Natural rubber covered sleeve(s)/cylinder(s) should be placed in Polyethylene storage bags). The Luminite protective wrap that is around your sleeve(s)/cylinder(s) is an Ozone protective wrap. The ideal storage area is where both the temperature (50 degrees is ideal) and the humidity are low and is away from any element that generates ozone (electric motors, lights, etc.). |
|||||||||||||
 |
|||||||||||||
|
|
|
Navigation: Home - Applications - Laser Engraved Rubber Rolls & Plates Care & Maintenance - Benefits - Support Services - Customer Service Computer Graphics - Art Specifications - Technical & Research & Development Quality Assurance - FAQ's - Facilities - Map & Directions - What's New - Contact us Replay Intro - Site Map Copyright 2004 Luminite Products Corporation all rights reserved No text or images can be used from this site without permission Site Design by WNYWIRED Web Sites |
